NVIDIA GeForce RTX 2070

The RTX 2070's strongest measured trait is bandwidth per pixel at 2,346 B/px, which puts it in the 78th percentile — that metric describes memory bandwidth available for every pixel it draws at 1440p. Its weakest is frames per $100 at 10.4 fps/$100 (21st percentile). That is a wide spread for a single card: it is specialised rather than balanced, and whether it suits you depends on which of the two you actually load.

The RTX 2070 turns a 175W board power budget into 51.8 fps at 1440p, or 0.30 fps/W against a pool median of 0.32 fps/W. Power, not transistor count, is the binding constraint on a modern GPU — Dennard scaling stopped holding around 2005, and Esmaeilzadeh and colleagues showed at ISCA 2011 that the fraction of a chip that can be powered at full speed shrinks with every node (“dark silicon”). Frames per watt is the shortest honest summary of what an architecture is doing with that budget.

For scale: the closest NVIDIA card from an earlier generation is the NVIDIA GeForce GTX 1080 Ti (2017), at 50.2 fps and 250W. The RTX 2070 is 3% faster while drawing 75W less.

Every rendered pixel has to be fed from memory. At 1440p the RTX 2070 has 2,346 B/px of memory bandwidth available per pixel it draws, against a median of 1,808 B/px — comfortably fed, so its shaders are the limit before its memory is. This is the roofline model applied to a game frame: Williams, Waterman and Patterson (Communications of the ACM, 2009) showed that any workload runs into either a compute ceiling or a memory-bandwidth ceiling, and that the ratio of the two is what decides which one you hit.

The RTX 2070 ranks #62 in 3DMark Steel Nomad but #57 on the 1440p game average — 5 places higher in real games than the synthetic implies. Steel Nomad is a 4K, non-ray-traced pass with heavy async compute and no upscaling, so it rewards raw shader and bandwidth throughput and ignores driver overhead, geometry front-end limits, and everything a game engine does outside the compute path. A gap this size means the card punches above its raw throughput in actual games.

On memory capacity, the RTX 2070 carries 8GB against a median of 8GB across the 10 other cards within 10% of its 1440p frame rate. That matches its class, so capacity is unlikely to be the first thing that limits it.

Method: percentiles are computed over the 77 non-legacy cards with a 1440p figure. Frame rates come from Tom's Hardware GPU hierarchy; specifications from manufacturer datasheets. Theoretical FP32 TFLOPS is deliberately not used as a cross-vendor comparison — RDNA 3 and 4 dual-issue FP32 doubles the paper figure without doubling game performance, and AMD itself declined to count it as extra shaders. The measured Steel Nomad score is used as the compute proxy instead. GPURanker does not run its own benchmarks.